HMI International Back-up Camera (Patent Pending) Vehicle Rear Vision Protective System:

    State-of-the-art camera and brake light assembly that "sees" areas at the rear of your vehicle that would normally be blocked from the driver's view.

    This is an incredible, wide angle, color, night vision camera that is integrated into the third brake light assembly, creating a new system with unique advantages. The purpose of the camera is to feed a video signal to a monitor located within easy view of the driver. The driver is given an immediate clear visual view of most blind spot areas directly to the rear of the vehicle. These areas are not visible to the driver using the vehicle's normal rear view mirror and side view mirrors.

    The camera automatically goes on when the vehicle is placed in reverse gear.

    Location is the advantage of combining the upper brake light and the monitor. The location of the upper brake light is near the highest part of your car, allowing a larger field of vision. The camera is designed to increase the field of vision as the distance increases.

    During nighttime use, the location of this camera provides two distinct advantages:

    1) When backing up at night, the vehicle's back-up lights provide enough light to allow the camera's night vision to create daylight.

    2) The unique location not only assists in blocking headlight glare, but uses the trailing vehicles light to illuminate the camera's field of vision. The effect of this increases viewable area during nighttime use.

    Easy installation is another distinct advantage of this system: The camera is designed for specific vehicles, allowing ease of installation. Simply remove the existing factory brake light and replace it with the Clip-On Rear Vision Camera. The camera/brake light assembly (BSE) uses the existing body cut out (NAV-03) access pathway to allow the wiring harness to transfer from the outside of the vehicle to the inside without altering the vehicle.